Water Expert Andy Ball: Changing Resins


Andy Ball

What is meant by scaling or fouling?
Fouling refers to the accumulation of unwanted material on solid surfaces, most often in an aquatic environment. The fouling material can consists of either living organisms (biofouling) or be a non-living substance (inorganic or organic). Other terms used in the literature to describe fouling include: deposit formation, encrustation, scaling, scale formation, crudding, and deposition. The last four terms are less inclusive than fouling; therefore, they should be used with caution.
Components subject to fouling
The following lists examples of components that may be subject of fouling and the direct effects of fouling:
heat exchanger surfaces – reduces thermal efficiency, increases temperature, creates corrosion, increases use of cooling water
piping, flow channels – reduces flow, increases pressure drop, increases energy expenditure, may create flow oscillations
ship hulls – increases fuel usage, reduces maximum speed
turbines – reduces efficiency, increases probability of failure
solar panels – decreases the electrical power generated
reverse osmosis membranes – reduces efficiency of water purification, increases pressure drop, increases energy expenditure
electrical heating elements – increases temperature of the element, increases corrosion, reduces lifespan
nuclear fuel in pressurized water reactors – axial offset anomaly
injection/spray nozzles (e.g., a nozzle spraying a fuel into a furnace) – incorrect amount injected, malformed jet, component inefficiency, component failure
venturi tubes, orifice plates – inaccurate or incorrect measurement of flow rate
pitot tubes in airplanes – inaccurate or incorrect indication of airplane speed
teeth – promotes tooth disease, decreases aesthetics
Andy Ball
862-354-7698